Wire gauge: 0.25-14
Termination: Intermediate terminal
Binding post/connector size: 0.25-14
Installation style: heat shrink welding
Product family: Solder ring SST
Heat shrinkable solder intermediate tube, various specifications, IP67 waterproof
Environmentally friendly and durable, wear-resistant and durable, dustproof and moisture-proof.
Waterproof heat shrinkable design: there is a coagulant inside, which solidifies and melts during heat shrinkage, and the wiring is tighter.
Labor-saving and convenient: transparent and safe to see, ensure that the wires are not exposed, and avoid arcing.
Convenient design, one plug and one pressure, to achieve easy docking, one docking, safe and secure.
Separation Barrier: There is a separation barrier in the middle of the inside of the terminal, so that the copper wire entering at both ends is the same length.
Installation:
1. Prepare the heat gun, wire strippers, wire, HP-SST.
2. Prepare the butt terminal, the tin ring is threaded into it, and on a wire, the stripping place is forked.
3. Insert the forked wires into each other and twist well.
4. Move the tin ring to the middle of the wire joint.
5. Heat gun heating, recommended operating temperature 400°C.
6. Heat the tin ring first, rotate the wire continuously until the tin ring is completely melted, and then heat the rubber ring and heat shrinkable tube at both ends until it is completely shrinking.